info@barrier1.us
(336) 617-8478
PRODUCTS
Testimonials
Typical Barrier1 Projects
- USA
- South Korea
- Afghanistan
- Canada
- Iraq
- East Africa
PROJECT LOCATIONS
- US Army
- US Air Force
- US Marines
- US Navy
- US Department of State
- Border Protection
- National Guard
- State Police
- Airports
- Nuclear Power Plants
- Manufacturing Facilities
- Critical Infrastructure Facility
- General Contractors
CUSTOMERS
Crash Beams - 2010
Barrier1 Systems, Inc. completed expedited order for more than 80 manually operated systems with delivery in 45 days in support of US Forces overseas. The kit based Drop Arm Crash Beam Gates are installed at various entry control points and provide protection against unauthorized vehicle intrusion. They are set up in about 2 hours using basic tools provided with instructions manuals. The drop arm is raised vertically or rotated horizontally by 1 person, and can span across 2 lanes. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Vehicle Arrestor - 2010
Barrier1 completed installation of Vehicle Arrestor at US military base in Southeast. Work included site surveys, engineering design, fabrication, installation, and testing. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work included multiple controls, traffic lights, alarms, warning signals, signs, loop detectors, and other safety devices.
Bollards - 2010
Barrier1 Systems, Inc. completed engineering, fabrication, and delivery of more than 200 Department of State K4, ASTM M30 rated Shallow Mount Bollards in support of Law Enforcement Facilities at locations in North East. The Shallow Mount Bollards are only 12" deep, and components are modular and easily installed. Barrier1 Systems also provided engineering support to the contractor installing these shallow mount bollards.
Crash Beams - 2010
Barrier1 Systems, Inc. completed multiple orders for manual crash beams at locations throughout the US and abroad. This includes private and military sites. The kit based Drop Arm Crash Beam Gates are installed at various entry control points and provide protection against unauthorized vehicle intrusion. They are set up in about 2 hours using basic tools provided with instructions manuals. The drop arm is raised vertically or rotated horizontally by 1 person. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Bollards - 2010
Barrier1 Systems, Inc. completed engineering, fabrication, and delivery of 60 M50 bollards that will stop 15,000 lb vehicle at 50 mph. The bollard order was fabricated and delivered in 14 days. Covers were stainless steel brushed finish. Engineering plans and installation instructions were provided.
Electric Crash Beams - 2010
Barrier1 Systems, Inc. completed order for multiple electric crash beams at locations in Northern US. The electric crash breams raise or lower in 2.5 seconds. System includes flashing beacons, traffic lights, loop detectors, card readers, and other devices. System is surface mounted and operational within hours. The crash beam has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Bollards - 2010
Barrier1 Systems, Inc. completed engineering design, fabrication, and installation of a unique bollard system bollard system requested by a Canadian manufacturing facility. Bollard system was designed to stop an 80,000 lb truck at 30 MPH impact speed. Project was completed on time and on schedule.
Waterway Arrestor - 2010
Barrier1 Systems, Inc. completed design of waterway arrestor system in foreign country to control marine traffic access to confidential infrastructure. The waterway arrestor was operated using wireless controls from the vessel, where the barrier was lowered to allow marine traffic access. A trigger automatically raised waterway arrestor once the vessel passed. The waterway arrestor adjusted automatically to tidal influence, where the end supports and net height would change according to tide level.
Bollards - 2010
Barrier1 Systems, Inc. installed a fixed bollard that requires no rebar. It is prefabricated with all structural components, so that the bollard unit is set in excavation and concrete is poured. Installation time and costs are significantly reduced. This set and pour bollard has been crash tested with 15,000 lb vehicle at 50 MPH, and has received an ASTM M50 rating.
Crash Beams - 2009
Barrier1 Systems, Inc. completed order for more than 42 manually operated vehicle barrier systems in support of US Forces overseas. The kit based Drop Arm Crash Beam Gates are installed at various entry control points and provide protection against unauthorized vehicle intrusion. They are set up in about 2 hours using basic tools provided with instructions manuals. The drop arm is raised vertically or rotated horizontally by 1 person, and can span across 2 lanes. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Vehicle Arrestor - 2009
Barrier1 completed installation of Vehicle Arrestor at US military base in Southeast. Work included site surveys, engineering design, fabrication, installation, and testing. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work also included multiple controls, alarms, traffic lights, warning signals, signs, loop detectors, and other safety devices.
Quick Connect Barriers - 2009
Barrier1 completed fabrication and installation over site of 15 Quick Connect Barriers with span distances from 20 feet to 60 feet. The Quick Connect Barrier is easily connected by 1 person in minutes to control vehicle access. It is an inexpensive alternative to multiple concrete jersey barriers being placed, removed and stored.
Bollards - 2009
Barrier1 Systems, Inc. completed engineering, fabrication, and delivery of more than 250 Department of State K4, ASTM M30 rated Shallow Mount Bollards in support of facilities in US. The Shallow Mount Bollards are only 12" deep, and components are modular and easily installed. Barrier1 Systems also provided engineering support to the contractor installing these shallow mount bollards.
Bollards - 2009
Barrier1 Systems, Inc. completed engineering, fabrication, and delivery of more than 60 Department of State K8, ASTM M40 rated Shallow Mount Bollards in support of facilities in US. The Shallow Mount Bollards are only 12" deep, and components are modular and easily installed. Barrier1 Systems also provided engineering support to the contractor installing these shallow mount bollards.
Crash Beams - 2009
Barrier1 Systems, Inc. completed orders for more than 15 manual crash beams at locations throughout the US and abroad. The kit based Drop Arm Crash Beam Gates are installed at various entry control points and provide protection against unauthorized vehicle intrusion. They are set up in about 2 hours using basic tools provided with instructions manuals. The drop arm is raised vertically or rotated horizontally by 1 person. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Vehicle Arrestors - 2008
Barrier1 completed installation of multiple Vehicle Arrestors at Military Base in South East. Vehicle barriers are deployed simultaneously using multiple controllers. Work included site surveys, engineering design, fabrication, installation, and testing. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work included multiple controls and deployment buttons, traffic signals, caution lights, alarms, signs, loop detectors, over speed detection, and other safety devices.
Crash Beams - 2008
Barrier1 Systems, Inc. completed design, fabrication, testing and shipping of kit based Drop Arm Gates for an undisclosed Client in support of US Security and Force Protection efforts overseas. The kit based Drop Arm Gates provide protection against unauthorized vehicle intrusion, and are set up in about 2 hour using basic tools. The drop arm is raised vertically or rotated horizontally by 1 person, and can span across 2 lanes. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Bollards – 2008
Barrier1 Systems, Inc. completed engineering, fabrication, and delivery of K4 & ASTM crash rated Shallow Mount Bollards in support of an airport security project located in western USA. The Shallow Mount Bollards are only 12" deep, and components are modular and easily installed. Barrier1 Systems also provided engineering support to the contractor installing these shallow mount bollards.
Vehicle Arrestor & Shallow Mount Bollards - 2008
Barrier1 completed installation of Vehicle Arrestor and Shallow Mount Bollards at US military base in Southeast. Work included site surveys, engineering design, fabrication, installation, and testing. The shallow mount bollards are 12" deep, and are K8 & ASTM crash test certified. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work also included camera systems, site lighting, wireless controls, traffic lights, warning signals, signs, loop detectors, and other safety devices.
Access Control Gates - 2008
Barrier1 Systems, Inc. completed engineering design and crash testing of a unique vehicle barrier system with specialized requirements that meet the needs of US Armed Forces overseas. Multiple systems are being fabricated and shipped. This vehicle barrier system is easy to install, deploys quickly by 1 person to deny vehicle access, spans across lanes, can be relocated, and has a relatively low price point given its massive stopping capability.
Crash Beams – 2008
Barrier1 Systems, Inc. completed design, fabrication, testing and shipping of kit based Drop Arm Gates in support of US Security Forces in Middle East. The kit based Drop Arm Gates provide protection against unauthorized vehicle intrusion, and are set up in about 1 hour using basic tools. The drop arm is raised vertically or rotated horizontally by 1 person, and can span across 2 lanes. The drop arm gate has massive vehicle arresting capability, and obtained an ASTM crash test certification stopping a 15,000 lb vehicle at 52 mph impact.
Vehicle Arrestor - 2008
Barrier1 Systems, Inc. is installing Vehicle Arrestor system at US military base in Midwest. Barrier1 Systems, Inc. completed site survey, engineering, design, and fabrication. Installation and infrastructure work will be completed in 2009. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work also included camera systems, site lighting, traffic lights, warning signals, signs, loop detectors, and other safety devices.
Vehicle Arrestor & Shallow Mount Bollards – 2008
Barrier1 was awarded contract to complete installation of Vehicle Arrestor and Shallow Mount Bollards at US military facility in southeast. Site survey and engineering design has been completed. Additional work includes fabrication, installation, infrastructure and testing. The shallow mount bollards are only 12" deep, and are K8 & ASTM crash test certified. The vehicle arrestor is an active net based vehicle barrier that deploys in less than 2 seconds from below the pavement, and absorbs energy and "gives" upon vehicle impact. Project work also included camera systems, site lighting, wireless controls, traffic lights, warning signals, signs, loop detectors, and other safety devices.
Crash Beams - 2008
Barrier1 Systems, Inc. completed submittals, design, and began fabrication of multiple drop arm gates for military facility in Mid-Atlantic, USA. The drop arm gates are being used in a specialized security application to prevent unauthorized vehicle access. The gates will span 28 feet across two lane roads. The drop arm is raised vertically or rotated horizontally by 1 person to allow access. The drop arm gate has obtained an ASTM crash test certification where it stopped a 15,000 lb vehicle at 52 mph impact.
Sliding Gate Engineering – 2008
Barrier1 Systems, Inc. completed design reviews, calculations, analyses and recommendations for crash resistant sliding steel gate systems used at Border Protection crossings in southern US. The sliding gates were designed to stop a 10,000 lb vehicle at 40 mph. Barrier1 used past crash test results, prior data, videos, and engineering analyses to assist with the design and analyses.